Find your message below: its solution is right underneath.
Other pages:Android: the VPN connectionAndroid: secure connection and deviceAndroid: data, settings and service
Settings received from the server rejected
Network configuration rejected — The tunnel configuration is incomplete or does not match the authorized addresses. Try again from the app.
What is happening: the connection settings exchanged with the server are incomplete or do not match the authorized addresses. The app rejects them, and the connection does not open.
What to do (in order; stop as soon as it works):
Disconnect the VPN, then start the connection again from FuzeVPN. The app then asks the server for the connection settings again.
If “Always-on VPN” is turned on, open “Settings → Network & internet → VPN”, then tap the gear icon next to FuzeVPN. Labels may vary by phone. Turn off “Block connections without VPN”, then “Always-on VPN”. Start the connection again in FuzeVPN. Once the connection works again, turn them back on.
Choose another location.
Switch to the other protocol: disconnect the VPN, then choose WireGuard or OpenVPN in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.
Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.
If the message still comes back, send a report to support.
Invalid WireGuard configuration — The received WireGuard address, DNS, server key, or routes are invalid.
What is happening: some WireGuard settings received from the server are invalid: the address, the DNS, the server key or the routes. The app rejects them.
What to do (in order; stop as soon as it works):
Disconnect the VPN, then start the connection again from FuzeVPN. The app then asks the server for the connection settings again.
If “Always-on VPN” is turned on, open “Settings → Network & internet → VPN”, then tap the gear icon next to FuzeVPN. Labels may vary by phone. Turn off “Block connections without VPN”, then “Always-on VPN”. Start the connection again in FuzeVPN. Once the connection works again, turn them back on.
Choose another location.
Switch to OpenVPN in the meantime: disconnect the VPN, then choose OpenVPN in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.
Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.
If the message still comes back, send a report to support.
OpenVPN profile rejected — The profile received from the server is incompatible. Recreate this device and try again.
What is happening: the OpenVPN settings received from the server do not follow the app’s checking or security rules. The app rejects them.
What to do (in order; stop as soon as it works):
Remove this device: open “Account”, then “Manage my devices” under “Your devices”, find “This device”, and tap “Remove”. This clears its old OpenVPN profile. Then connect to the VPN again: a new device is created. When you next connect using OpenVPN, the app creates a new OpenVPN profile for it.
Disconnect the VPN, then start the connection again from FuzeVPN. The app then asks the server for the connection settings again.
If “Always-on VPN” is turned on, open “Settings → Network & internet → VPN”, then tap the gear icon next to FuzeVPN. Labels may vary by phone. Turn off “Block connections without VPN”, then “Always-on VPN”. Start the connection again in FuzeVPN. Once the connection works again, turn them back on.
Choose another location.
Switch to WireGuard in the meantime: disconnect the VPN, then choose WireGuard in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.
Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.
If the message still comes back, send a report to support.
OpenVPN address missing — The server did not provide a usable tunnel address.
What is happening: the server did not provide any usable address for the VPN connection.
What to do (in order; stop as soon as it works):
Check that no other VPN app is active on the phone.
When starting the connection again from FuzeVPN, accept Android’s request if it appears.
Disconnect the VPN, then start the connection again from FuzeVPN. The app then asks the server for the connection settings again.
If “Always-on VPN” is turned on, open “Settings → Network & internet → VPN”, then tap the gear icon next to FuzeVPN. Labels may vary by phone. Turn off “Block connections without VPN”, then “Always-on VPN”. Start the connection again in FuzeVPN. Once the connection works again, turn them back on.
Choose another location.
Switch to WireGuard in the meantime: disconnect the VPN, then choose WireGuard in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.
Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.
If the message still comes back, send a report to support.
OpenVPN DNS missing — The server did not provide a usable DNS server.
What is happening: the server did not provide any usable DNS server. DNS is used to find the address of websites.
What to do (in order; stop as soon as it works):
Check that no other VPN app is active on the phone.
When starting the connection again from FuzeVPN, accept Android’s request if it appears.
Disconnect the VPN, then start the connection again from FuzeVPN. The app then asks the server for the connection settings again.
If “Always-on VPN” is turned on, open “Settings → Network & internet → VPN”, then tap the gear icon next to FuzeVPN. Labels may vary by phone. Turn off “Block connections without VPN”, then “Always-on VPN”. Start the connection again in FuzeVPN. Once the connection works again, turn them back on.
Choose another location.
Switch to WireGuard in the meantime: disconnect the VPN, then choose WireGuard in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.
Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.
If the message still comes back, send a report to support.
OpenVPN routes missing — The server did not provide usable tunnel routes.
What is happening: the server did not provide any usable route, meaning no path to send your data through the VPN connection.
What to do (in order; stop as soon as it works):
Check that no other VPN app is active on the phone.
When starting the connection again from FuzeVPN, accept Android’s request if it appears.
Disconnect the VPN, then start the connection again from FuzeVPN. The app then asks the server for the connection settings again.
If “Always-on VPN” is turned on, open “Settings → Network & internet → VPN”, then tap the gear icon next to FuzeVPN. Labels may vary by phone. Turn off “Block connections without VPN”, then “Always-on VPN”. Start the connection again in FuzeVPN. Once the connection works again, turn them back on.
Choose another location.
Switch to WireGuard in the meantime: disconnect the VPN, then choose WireGuard in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.
Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.
If the message still comes back, send a report to support.
Invalid OpenVPN cipher — The server supplied an encryption algorithm that is not in the allowed list.
What is happening: the server provided an encryption method that the app does not allow. So it rejects these settings.
What to do (in order; stop as soon as it works):
Disconnect the VPN, then start the connection again from FuzeVPN. The app then asks the server for the connection settings again.
If “Always-on VPN” is turned on, open “Settings → Network & internet → VPN”, then tap the gear icon next to FuzeVPN. Labels may vary by phone. Turn off “Block connections without VPN”, then “Always-on VPN”. Start the connection again in FuzeVPN. Once the connection works again, turn them back on.
Choose another location.
Switch to WireGuard in the meantime: disconnect the VPN, then choose WireGuard in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.
Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.
If the message still comes back, send a report to support.
OpenVPN TLS verification missing — The profile does not explicitly require server certificate verification.
What is happening: the OpenVPN settings received do not ask to verify the server’s certificate, which proves its identity. The app rejects these settings, which go against its security rules.
What to do (in order; stop as soon as it works):
Disconnect the VPN, then start the connection again from FuzeVPN. The app then asks the server for the connection settings again.
If “Always-on VPN” is turned on, open “Settings → Network & internet → VPN”, then tap the gear icon next to FuzeVPN. Labels may vary by phone. Turn off “Block connections without VPN”, then “Always-on VPN”. Start the connection again in FuzeVPN. Once the connection works again, turn them back on.
Choose another location.
Switch to WireGuard in the meantime: disconnect the VPN, then choose WireGuard in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.
Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.
If the message still comes back, send a report to support.
OpenVPN compression rejected — OpenVPN Core rejected the compression mode announced by the profile or server.
What is happening: OpenVPN rejected the way of compressing data requested by the server or by the settings received.
What to do (in order; stop as soon as it works):
Choose another location.
Switch to WireGuard in the meantime: disconnect the VPN, then choose WireGuard in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.
Disconnect the VPN, then start the connection again from FuzeVPN. The app then asks the server for the connection settings again.
If “Always-on VPN” is turned on, open “Settings → Network & internet → VPN”, then tap the gear icon next to FuzeVPN. Labels may vary by phone. Turn off “Block connections without VPN”, then “Always-on VPN”. Start the connection again in FuzeVPN. Once the connection works again, turn them back on.
Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.
If the message still comes back, send a report to support.
Unsupported OpenVPN feature — The profile or server requires a feature missing from this Android client.
What is happening: the server or the settings received ask for an OpenVPN feature that the Android app does not offer.
What to do (in order; stop as soon as it works):
Choose another location.
Switch to WireGuard in the meantime: disconnect the VPN, then choose WireGuard in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.
Disconnect the VPN, then start the connection again from FuzeVPN. The app then asks the server for the connection settings again.
If “Always-on VPN” is turned on, open “Settings → Network & internet → VPN”, then tap the gear icon next to FuzeVPN. Labels may vary by phone. Turn off “Block connections without VPN”, then “Always-on VPN”. Start the connection again in FuzeVPN. Once the connection works again, turn them back on.
Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.
If the message still comes back, send a report to support.
Unsupported OpenVPN authentication — The server or a proxy requests interactive credentials that are not part of this certificate profile.
What is happening: the server, or a relay the connection goes through, asks for sign-in details to be entered. The app’s OpenVPN settings do not allow for this.
What to do (in order; stop as soon as it works):
Choose another location.
Switch to WireGuard in the meantime: disconnect the VPN, then choose WireGuard in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.
Disconnect the VPN, then start the connection again from FuzeVPN. The app then asks the server for the connection settings again.
If “Always-on VPN” is turned on, open “Settings → Network & internet → VPN”, then tap the gear icon next to FuzeVPN. Labels may vary by phone. Turn off “Block connections without VPN”, then “Always-on VPN”. Start the connection again in FuzeVPN. Once the connection works again, turn them back on.
Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.
If the message still comes back, send a report to support.
OpenVPN intermediary transport failed — OpenVPN Core reported a failure of the configured proxy or relay.
What is happening: the relay set in the OpenVPN settings, which the connection goes through, did not work.
What to do (in order; stop as soon as it works):
Choose another location.
Switch to WireGuard in the meantime: disconnect the VPN, then choose WireGuard in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.
Disconnect the VPN, then start the connection again from FuzeVPN. The app then asks the server for the connection settings again.
If “Always-on VPN” is turned on, open “Settings → Network & internet → VPN”, then tap the gear icon next to FuzeVPN. Labels may vary by phone. Turn off “Block connections without VPN”, then “Always-on VPN”. Start the connection again in FuzeVPN. Once the connection works again, turn them back on.
Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.
If the message still comes back, send a report to support.
Send a report to support
If a code appears below the message (“Diagnostic code: …”), copy it with the “Copy” button.
In Account, under “Need help?”, tap “Run diagnostics”. When signed in to your account, tick “Send the report”, then tap “Run diagnostics”. The “Reference: …” appears after sending.
If sending fails, tap “Retry sending”. If you are not signed in, tap “Run diagnostics”, then “Save report” before closing the app.
Then write to support at contact@fuzevpn.com, with the report reference (“Reference: …”) or the saved report. Add the exact message and the diagnostic code. Also include your device, the FuzeVPN version if visible (open “Account → About FuzeVPN → Component licenses”), the chosen location, the network and the time. We reply within 72 hours, in your language.