Technical messages / FuzeVPN

Android: the VPN connection

Messages from the Android app when the VPN connection does not start, stops or is refused. Each message is followed by its solution. These messages apply to Android phones and tablets, and to the Android app on Chromebook. On a Chromebook, open “Settings → Apps → Manage Google Play preferences → Android Settings → Network & internet → VPN” to reach Android’s VPN settings.

Last updated · FuzeVPN

A previous connection is still active

Native tunnel already active — Android reports that a previous VPN session is still using the interface.

What is happening: a previous VPN connection, an operation in progress or another account is still using the VPN’s network access. The new connection is blocked.

What to do (in order; stop as soon as it works):

  1. If Android’s always-on VPN is active, open “Settings → Network & internet → VPN”, then tap the gear icon next to FuzeVPN. Labels may vary by phone. First turn off “Block connections without VPN”, then “Always-on VPN”. In all cases, disconnect FuzeVPN. Wait until the app shows “Disconnected” and its notification disappears.

  2. FuzeVPN checks for up to 15 seconds whether the VPN has stopped. If the app offers “Retry shutdown”, tap it.

  3. Keep “Always-on VPN” and “Block connections without VPN” turned off while completing the disconnection. Turn them back on once the connection works again.

  4. On Android, if you want to reconnect, start the connection you want as soon as the shutdown is confirmed, with no waiting time: another location, reconnecting or a new OpenVPN profile. Once FuzeVPN shows “Connected”, turn “Always-on VPN” back on, then “Block connections without VPN”, if you turned them off.

  5. Close and reopen FuzeVPN, then try again.

  6. Try the other protocol or another location. To change protocol, disconnect the VPN, then choose WireGuard or OpenVPN in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.

  7. Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.

  8. Restart the phone, then try again.

  9. If the message still comes back, send a report to support.

OpenVPN session still active — The native engine still holds the previous OpenVPN session and refuses to create a second one.

What is happening: OpenVPN is still holding the previous connection and refuses to open a second one.

What to do (in order; stop as soon as it works):

  1. If Android’s always-on VPN is active, open “Settings → Network & internet → VPN”, then tap the gear icon next to FuzeVPN. Labels may vary by phone. First turn off “Block connections without VPN”, then “Always-on VPN”. In all cases, disconnect FuzeVPN. Wait until the app shows “Disconnected” and its notification disappears.

  2. FuzeVPN checks for up to 15 seconds whether the VPN has stopped. If the app offers “Retry shutdown”, tap it.

  3. Keep “Always-on VPN” and “Block connections without VPN” turned off while completing the disconnection. Turn them back on once the connection works again.

  4. On Android, if you want to reconnect, start the connection you want as soon as the shutdown is confirmed, with no waiting time: another location, reconnecting or a new OpenVPN profile. Once FuzeVPN shows “Connected”, turn “Always-on VPN” back on, then “Block connections without VPN”, if you turned them off.

  5. Close and reopen FuzeVPN, then try again.

  6. Try the other protocol or another location. To change protocol, disconnect the VPN, then choose WireGuard or OpenVPN in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.

  7. Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.

  8. Restart the phone, then try again.

  9. If the message still comes back, send a report to support.

WireGuard operation still active — The previous WireGuard operation has not yet released its native service.

What is happening: the previous WireGuard request has not finished yet. It is blocking the new connection.

What to do (in order; stop as soon as it works):

  1. If Android’s always-on VPN is active, open “Settings → Network & internet → VPN”, then tap the gear icon next to FuzeVPN. Labels may vary by phone. First turn off “Block connections without VPN”, then “Always-on VPN”. In all cases, disconnect FuzeVPN. Wait until the app shows “Disconnected” and its notification disappears.

  2. FuzeVPN checks for up to 15 seconds whether the VPN has stopped. If the app offers “Retry shutdown”, tap it.

  3. Keep “Always-on VPN” and “Block connections without VPN” turned off while completing the disconnection. Turn them back on once the connection works again.

  4. On Android, if you want to reconnect, start the connection you want as soon as the shutdown is confirmed, with no waiting time: another location, reconnecting or a new OpenVPN profile. Once FuzeVPN shows “Connected”, turn “Always-on VPN” back on, then “Block connections without VPN”, if you turned them off.

  5. Close and reopen FuzeVPN, then try again.

  6. Try the other protocol or another location. To change protocol, disconnect the VPN, then choose WireGuard or OpenVPN in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.

  7. Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.

  8. Restart the phone, then try again.

  9. If the message still comes back, send a report to support.

OpenVPN identity still in use — A native OpenVPN session is still using this device’s key or certificate.

What is happening: a previous VPN connection, an operation in progress or another account is still using this device’s OpenVPN key.

What to do (in order; stop as soon as it works):

  1. If Android’s always-on VPN is active, open “Settings → Network & internet → VPN”, then tap the gear icon next to FuzeVPN. Labels may vary by phone. First turn off “Block connections without VPN”, then “Always-on VPN”. In all cases, disconnect FuzeVPN. Wait until the app shows “Disconnected” and its notification disappears.

  2. FuzeVPN checks for up to 15 seconds whether the VPN has stopped. If the app offers “Retry shutdown”, tap it.

  3. Keep “Always-on VPN” and “Block connections without VPN” turned off while completing the disconnection. Turn them back on once the connection works again.

  4. On Android, if you want to reconnect, start the connection you want as soon as the shutdown is confirmed, with no waiting time: another location, reconnecting or a new OpenVPN profile. Once FuzeVPN shows “Connected”, turn “Always-on VPN” back on, then “Block connections without VPN”, if you turned them off.

  5. Close and reopen FuzeVPN, then try again.

  6. Try the other protocol or another location. To change protocol, disconnect the VPN, then choose WireGuard or OpenVPN in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.

  7. Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.

  8. Restart the phone, then try again.

  9. If the message still comes back, send a report to support.

WireGuard identity already in use — Another operation is still using this account’s WireGuard key.

What is happening: a previous request is still using the WireGuard identity saved on this device for your account. It is blocking the new connection.

What to do (in order; stop as soon as it works):

  1. If Android’s always-on VPN is active, open “Settings → Network & internet → VPN”, then tap the gear icon next to FuzeVPN. Labels may vary by phone. First turn off “Block connections without VPN”, then “Always-on VPN”. In all cases, disconnect FuzeVPN. Wait until the app shows “Disconnected” and its notification disappears.

  2. FuzeVPN checks for up to 15 seconds whether the VPN has stopped. If the app offers “Retry shutdown”, tap it.

  3. Keep “Always-on VPN” and “Block connections without VPN” turned off while completing the disconnection. Turn them back on once the connection works again.

  4. On Android, if you want to reconnect, start the connection you want as soon as the shutdown is confirmed, with no waiting time: another location, reconnecting or a new OpenVPN profile. Once FuzeVPN shows “Connected”, turn “Always-on VPN” back on, then “Block connections without VPN”, if you turned them off.

  5. Close and reopen FuzeVPN, then try again.

  6. Try the other protocol or another location. To change protocol, disconnect the VPN, then choose WireGuard or OpenVPN in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.

  7. Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.

  8. Restart the phone, then try again.

  9. If the message still comes back, send a report to support.

OpenVPN interface rejected or cut off

OpenVPN interface creation failed — OpenVPN Core could not obtain the TUN interface from Android VpnService.

What is happening: OpenVPN did not get the VPN’s network access from Android. So the VPN connection could not open.

What to do (in order; stop as soon as it works):

  1. Stop any other VPN app on the phone.

  2. Start the connection again from FuzeVPN. Accept Android’s request if it appears.

  3. Close and reopen FuzeVPN, then try again.

  4. Try the other protocol or another location. To change protocol, disconnect the VPN, then choose WireGuard or OpenVPN in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.

  5. Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.

  6. Restart the phone, then try again.

  7. If the message still comes back, send a report to support.

Could not create OpenVPN interface — Android rejected the network configuration requested by OpenVPN.

What is happening: Android rejected the network settings that OpenVPN requested for the VPN connection.

What to do (in order; stop as soon as it works):

  1. Stop any other VPN app on the phone.

  2. Start the connection again from FuzeVPN. Accept Android’s request if it appears.

  3. Close and reopen FuzeVPN, then try again.

  4. Try the other protocol or another location. To change protocol, disconnect the VPN, then choose WireGuard or OpenVPN in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.

  5. Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.

  6. Restart the phone, then try again.

  7. If the message still comes back, send a report to support.

OpenVPN TUN setup failed — OpenVPN Core rejected the network plan before creating the Android interface.

What is happening: OpenVPN rejected the connection’s network settings, before asking Android for the VPN’s network access.

What to do (in order; stop as soon as it works):

  1. Stop any other VPN app on the phone.

  2. Start the connection again from FuzeVPN. Accept Android’s request if it appears.

  3. Close and reopen FuzeVPN, then try again.

  4. Try the other protocol or another location. To change protocol, disconnect the VPN, then choose WireGuard or OpenVPN in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.

  5. Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.

  6. Restart the phone, then try again.

  7. If the message still comes back, send a report to support.

OpenVPN interface interrupted — OpenVPN Core received a request to stop the TUN interface.

What is happening: OpenVPN received a request to stop the VPN’s network access.

What to do (in order; stop as soon as it works):

  1. Stop any other VPN app on the phone.

  2. Start the connection again from FuzeVPN. Accept Android’s request if it appears.

  3. Close and reopen FuzeVPN, then try again.

  4. Try the other protocol or another location. To change protocol, disconnect the VPN, then choose WireGuard or OpenVPN in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.

  5. Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.

  6. Restart the phone, then try again.

  7. If the message still comes back, send a report to support.

OpenVPN interface disabled — Android or OpenVPN Core disabled the TUN interface during the connection.

What is happening: Android or OpenVPN cut off the VPN’s network access during the connection.

What to do (in order; stop as soon as it works):

  1. Stop any other VPN app on the phone.

  2. Start the connection again from FuzeVPN. Accept Android’s request if it appears.

  3. Close and reopen FuzeVPN, then try again.

  4. Try the other protocol or another location. To change protocol, disconnect the VPN, then choose WireGuard or OpenVPN in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.

  5. Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.

  6. Restart the phone, then try again.

  7. If the message still comes back, send a report to support.

OpenVPN interface already open — OpenVPN requested a second interface in the same connection. The tunnel was stopped for safety.

What is happening: OpenVPN requested a second network access for the same connection. The VPN connection was stopped for safety.

What to do (in order; stop as soon as it works):

  1. Stop any other VPN app on the phone.

  2. Start the connection again from FuzeVPN. Accept Android’s request if it appears.

  3. Close and reopen FuzeVPN, then try again.

  4. Try the other protocol or another location. To change protocol, disconnect the VPN, then choose WireGuard or OpenVPN in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.

  5. Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.

  6. Restart the phone, then try again.

  7. If the message still comes back, send a report to support.

The VPN connection does not start or stops

OpenVPN client setup failed — OpenVPN Core could not initialize the client before the network connection.

What is happening: OpenVPN could not get ready before connecting to the network.

What to do (in order; stop as soon as it works):

  1. Start the connection again from the FuzeVPN app.

  2. Close and reopen FuzeVPN, then try again.

  3. Try the other protocol or another location. To change protocol, disconnect the VPN, then choose WireGuard or OpenVPN in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.

  4. Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.

  5. Restart the phone, then try again.

  6. If the message still comes back, send a report to support.

OpenVPN start rejected — The Android service is ready, but OpenVPN Core did not accept starting the profile.

What is happening: FuzeVPN’s service was ready on the phone, but OpenVPN refused to start the connection with its settings.

What to do (in order; stop as soon as it works):

  1. Start the connection again from the FuzeVPN app.

  2. Close and reopen FuzeVPN, then try again.

  3. Try the other protocol or another location. To change protocol, disconnect the VPN, then choose WireGuard or OpenVPN in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.

  4. Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.

  5. Restart the phone, then try again.

  6. If the message still comes back, send a report to support.

WireGuard start rejected — The WireGuard engine rejected activation of the configuration.

What is happening: WireGuard refused to activate the VPN connection settings.

What to do (in order; stop as soon as it works):

  1. Start the connection again from the FuzeVPN app.

  2. Close and reopen FuzeVPN, then try again.

  3. Try the other protocol or another location. To change protocol, disconnect the VPN, then choose WireGuard or OpenVPN in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.

  4. Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.

  5. Restart the phone, then try again.

  6. If the message still comes back, send a report to support.

OpenVPN service unavailable — Android could not start the OpenVPN foreground service.

What is happening: Android could not start FuzeVPN’s OpenVPN service, which runs the VPN connection.

What to do (in order; stop as soon as it works):

  1. Start the connection again from the FuzeVPN app.

  2. Close and reopen FuzeVPN, then try again.

  3. Try the other protocol or another location. To change protocol, disconnect the VPN, then choose WireGuard or OpenVPN in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.

  4. Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.

  5. Restart the phone, then try again.

  6. If the message still comes back, send a report to support.

WireGuard service unavailable — Android could not keep the WireGuard service in the foreground.

What is happening: Android could not keep FuzeVPN’s WireGuard service active. This is the service that runs the VPN connection.

What to do (in order; stop as soon as it works):

  1. Start the connection again from the FuzeVPN app.

  2. Close and reopen FuzeVPN, then try again.

  3. Try the other protocol or another location. To change protocol, disconnect the VPN, then choose WireGuard or OpenVPN in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.

  4. Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.

  5. In Android settings, open Apps, FuzeVPN, then Battery or Battery usage. Allow background activity and select Unrestricted when you want to keep the VPN active.

  6. Restart the phone, then try again.

  7. If the message still comes back, send a report to support.

OpenVPN connection interrupted — OpenVPN Core stopped before emitting the CONNECTED event.

What is happening: OpenVPN stopped before the VPN connection was established.

What to do (in order; stop as soon as it works):

  1. Start the connection again from the FuzeVPN app.

  2. Close and reopen FuzeVPN, then try again.

  3. Try the other protocol or another location. To change protocol, disconnect the VPN, then choose WireGuard or OpenVPN in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.

  4. Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.

  5. Restart the phone, then try again.

  6. If the message still comes back, send a report to support.

OpenVPN stopped before connecting — The native OpenVPN loop stopped before CONNECTED, without an explicit Core error.

What is happening: OpenVPN stopped before the VPN connection was established, without giving a specific error.

What to do (in order; stop as soon as it works):

  1. Start the connection again from the FuzeVPN app.

  2. Close and reopen FuzeVPN, then try again.

  3. Try the other protocol or another location. To change protocol, disconnect the VPN, then choose WireGuard or OpenVPN in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.

  4. Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.

  5. Restart the phone, then try again.

  6. If the message still comes back, send a report to support.

OpenVPN Core ended with an error — The native OpenVPN loop ended with an error and no more specific terminal event.

What is happening: OpenVPN stopped with a general error.

What to do (in order; stop as soon as it works):

  1. Start the connection again from the FuzeVPN app.

  2. Close and reopen FuzeVPN, then try again.

  3. Try the other protocol or another location. To change protocol, disconnect the VPN, then choose WireGuard or OpenVPN in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.

  4. Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.

  5. Restart the phone, then try again.

  6. If the message still comes back, send a report to support.

OpenVPN client interrupted — OpenVPN Core received a terminal client stop.

What is happening: The current OpenVPN connection stopped.

What to do (in order; stop as soon as it works):

  1. Start the connection again from the FuzeVPN app.

  2. Close and reopen FuzeVPN, then try again.

  3. Try the other protocol or another location. To change protocol, disconnect the VPN, then choose WireGuard or OpenVPN in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.

  4. Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.

  5. Restart the phone, then try again.

  6. If the message still comes back, send a report to support.

OpenVPN restart requested — OpenVPN Core requested a restart of its transport session.

What is happening: OpenVPN asked to restart its link with the VPN server.

What to do (in order; stop as soon as it works):

  1. Start the connection again from the FuzeVPN app.

  2. Close and reopen FuzeVPN, then try again.

  3. Try the other protocol or another location. To change protocol, disconnect the VPN, then choose WireGuard or OpenVPN in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.

  4. Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.

  5. Restart the phone, then try again.

  6. If the message still comes back, send a report to support.

Native OpenVPN call interrupted — An app error interrupted OpenVPN. Try connecting again. If the problem continues, run a diagnostic.

What is happening: an app error interrupted OpenVPN.

What to do (in order; stop as soon as it works):

  1. Start the connection again from the FuzeVPN app.

  2. Close and reopen FuzeVPN, then try again.

  3. Try the other protocol or another location. To change protocol, disconnect the VPN, then choose WireGuard or OpenVPN in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.

  4. Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.

  5. Restart the phone, then try again.

  6. If the message still comes back, send a report to support.

OpenVPN call timed out — A JNI call to OpenVPN Core exceeded its maximum duration.

What is happening: a request from FuzeVPN to OpenVPN did not complete within the expected time.

What to do (in order; stop as soon as it works):

  1. Start the connection again from the FuzeVPN app.

  2. Close and reopen FuzeVPN, then try again.

  3. Try the other protocol or another location. To change protocol, disconnect the VPN, then choose WireGuard or OpenVPN in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.

  4. Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.

  5. Restart the phone, then try again.

  6. If the message still comes back, send a report to support.

OpenVPN connection not confirmed — The OpenVPN connection could not be confirmed. It was stopped for safety. Try again.

What is happening: FuzeVPN could not confirm that the OpenVPN connection was properly established. It was stopped for safety.

What to do (in order; stop as soon as it works):

  1. Start the connection again from the FuzeVPN app.

  2. Close and reopen FuzeVPN, then try again.

  3. Try the other protocol or another location. To change protocol, disconnect the VPN, then choose WireGuard or OpenVPN in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.

  4. Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.

  5. Restart the phone, then try again.

  6. If the message still comes back, send a report to support.

OpenVPN engine unavailable — This app version does not contain a usable OpenVPN engine.

What is happening: the version of FuzeVPN installed on this phone does not let you use OpenVPN.

What to do (in order; stop as soon as it works):

  1. Disconnect the VPN, then choose WireGuard in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”. To get OpenVPN back, update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one.

  2. Close and reopen FuzeVPN, then try again.

  3. Restart the phone, then try again.

  4. If the message still comes back, send a report to support.

Missing information or unspecified error

Invalid VPN account — The native operation is not associated with a valid account identifier.

What is happening: an internal detail is missing: the VPN request is not linked to a valid account identifier.

What to do (in order; stop as soon as it works):

  1. Start the connection again from the FuzeVPN app.

  2. Close and reopen FuzeVPN, then try again.

  3. Try the other protocol or another location. To change protocol, disconnect the VPN, then choose WireGuard or OpenVPN in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.

  4. Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.

  5. Restart the phone, then try again.

  6. If the message still comes back, send a report to support.

Invalid device identifier — The device identifier sent to the native engine is missing or invalid.

What is happening: an internal detail is missing: this device’s identifier, needed for the VPN connection, is missing or not valid.

What to do (in order; stop as soon as it works):

  1. Start the connection again from the FuzeVPN app.

  2. Close and reopen FuzeVPN, then try again.

  3. Try the other protocol or another location. To change protocol, disconnect the VPN, then choose WireGuard or OpenVPN in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.

  4. Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.

  5. Restart the phone, then try again.

  6. If the message still comes back, send a report to support.

Incomplete VPN parameters — The information needed for this VPN operation is incomplete. Try again. If the problem continues, run a diagnostic.

What is happening: some information needed for the VPN request is missing.

What to do (in order; stop as soon as it works):

  1. Start the connection again from the FuzeVPN app.

  2. Close and reopen FuzeVPN, then try again.

  3. Try the other protocol or another location. To change protocol, disconnect the VPN, then choose WireGuard or OpenVPN in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.

  4. Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.

  5. Restart the phone, then try again.

  6. If the message still comes back, send a report to support.

Android bridge unavailable — The app cannot access the Android VPN service. Close and reopen the app, then try again.

What is happening: the FuzeVPN screen cannot reach the part of the app that manages the VPN on the phone.

What to do (in order; stop as soon as it works):

  1. Close and reopen FuzeVPN, then try again.

  2. Try the other protocol or another location. To change protocol, disconnect the VPN, then choose WireGuard or OpenVPN in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.

  3. Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.

  4. Restart the phone, then try again.

  5. If the message still comes back, send a report to support.

Android operation interrupted — An app error interrupted the VPN operation. Try again. If the problem continues, run a diagnostic.

What is happening: an app error interrupted the VPN request.

What to do (in order; stop as soon as it works):

  1. Start the connection again from the FuzeVPN app.

  2. Close and reopen FuzeVPN, then try again.

  3. Try the other protocol or another location. To change protocol, disconnect the VPN, then choose WireGuard or OpenVPN in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.

  4. Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.

  5. Restart the phone, then try again.

  6. If the message still comes back, send a report to support.

Unclassified native VPN error — An undocumented native branch failed. Send the diagnostic code shown below to support.

What is happening: FuzeVPN did not recognize this error. Its code is shown below the message, after “Diagnostic code”. Copy the code and send it with your diagnostic report to support. Then try the steps below.

What to do (in order; stop as soon as it works, but send a report in all cases):

  1. Start the connection again from the FuzeVPN app.

  2. Close and reopen FuzeVPN, then try again.

  3. Try the other protocol or another location. To change protocol, disconnect the VPN, then choose WireGuard or OpenVPN in “Connection → Advanced options → Protocol”. Then connect again and check that FuzeVPN shows “Connected”.

  4. Update FuzeVPN. Already installed from Google Play? Keep updating it on Google Play. If you installed the APK, update it by installing the new APK over the old one. Then try again.

  5. Restart the phone, then try again.

  6. Send a report to support, even if the VPN works again.

Send a report to support

  1. If a code appears below the message (“Diagnostic code: …”), copy it with the “Copy” button.

  2. In Account, under “Need help?”, tap “Run diagnostics”. When signed in to your account, tick “Send the report”, then tap “Run diagnostics”. The “Reference: …” appears after sending.

  3. If sending fails, tap “Retry sending”. If you are not signed in, tap “Run diagnostics”, then “Save report” before closing the app.

  4. Then write to support at contact@fuzevpn.com, with the report reference (“Reference: …”) or the saved report. Add the exact message and the diagnostic code. Also include your device, the FuzeVPN version if visible (open “Account → About FuzeVPN → Component licenses”), the chosen location, the network and the time. We reply within 72 hours, in your language.