Technical messages / FuzeVPN

Windows: updates and diagnostics

Messages from the Windows app when an update is rejected, and the diagnostics results. Each message is followed by its solution.

Last updated · FuzeVPN

Update rejected

The update service response is invalid.

What is happening: FuzeVPN’s update service sent a badly formed or inconsistent response. So FuzeVPN does not use it to update itself.

What to do (in order; stop as soon as it works):

  1. Open “Settings → Updates” in FuzeVPN, then click “Check for updates” and “Download update”. Disconnect the VPN and wait until FuzeVPN shows “Not protected”, then click “Install now” and accept the Windows permission prompt when it appears. Once the update is complete, open FuzeVPN if it is not already open. If FuzeVPN shows “Not protected”, click “Quick connect”. Then check that FuzeVPN shows “Protected”. If the same message comes back, try again later.

  2. If FuzeVPN does not report an incompatible installed version, install the latest version manually, with the installer from the FuzeVPN for Windows page: it keeps your device and preferences. Choose the one for your processor, x64 or ARM64, shown in Windows Settings → System → About → System type. Once the update is complete, open FuzeVPN if it is not already open. If FuzeVPN shows “Not protected”, click “Quick connect”. Then check that FuzeVPN shows “Protected”.

    For the portable version of FuzeVPN, follow the article on updating on Windows instead.

  3. If the message still comes back, send a report to support.

The update download address is invalid.

What is happening: the address given for downloading the update is badly formed or does not follow FuzeVPN’s rules. So FuzeVPN does not use it.

What to do (in order; stop as soon as it works):

  1. Open “Settings → Updates” in FuzeVPN, then click “Check for updates” and “Download update”. Disconnect the VPN and wait until FuzeVPN shows “Not protected”, then click “Install now” and accept the Windows permission prompt when it appears. Once the update is complete, open FuzeVPN if it is not already open. If FuzeVPN shows “Not protected”, click “Quick connect”. Then check that FuzeVPN shows “Protected”. If the same message comes back, try again later.

  2. If FuzeVPN does not report an incompatible installed version, install the latest version manually, with the installer from the FuzeVPN for Windows page: it keeps your device and preferences. Choose the one for your processor, x64 or ARM64, shown in Windows Settings → System → About → System type. Once the update is complete, open FuzeVPN if it is not already open. If FuzeVPN shows “Not protected”, click “Quick connect”. Then check that FuzeVPN shows “Protected”.

    For the portable version of FuzeVPN, follow the article on updating on Windows instead.

  3. If the message still comes back, send a report to support.

The download was redirected to an unauthorized address.

What is happening: the update download was redirected to another address. FuzeVPN does not accept any redirect of this kind, so it stops the download.

What to do (in order; stop as soon as it works):

  1. Open “Settings → Updates” in FuzeVPN, then click “Check for updates” and “Download update”. Disconnect the VPN and wait until FuzeVPN shows “Not protected”, then click “Install now” and accept the Windows permission prompt when it appears. Once the update is complete, open FuzeVPN if it is not already open. If FuzeVPN shows “Not protected”, click “Quick connect”. Then check that FuzeVPN shows “Protected”. If the same message comes back, try again later.

  2. If FuzeVPN does not report an incompatible installed version, install the latest version manually, with the installer from the FuzeVPN for Windows page: it keeps your device and preferences. Choose the one for your processor, x64 or ARM64, shown in Windows Settings → System → About → System type. Once the update is complete, open FuzeVPN if it is not already open. If FuzeVPN shows “Not protected”, click “Quick connect”. Then check that FuzeVPN shows “Protected”.

    For the portable version of FuzeVPN, follow the article on updating on Windows instead.

  3. If the message still comes back, send a report to support.

The server returned an empty file.

What is happening: the downloaded update file is empty. So it cannot be installed.

What to do (in order; stop as soon as it works):

  1. Open “Settings → Updates” in FuzeVPN, then click “Check for updates” and “Download update”. Disconnect the VPN and wait until FuzeVPN shows “Not protected”, then click “Install now” and accept the Windows permission prompt when it appears. Once the update is complete, open FuzeVPN if it is not already open. If FuzeVPN shows “Not protected”, click “Quick connect”. Then check that FuzeVPN shows “Protected”. If the same message comes back, try again later.

  2. If FuzeVPN does not report an incompatible installed version, install the latest version manually, with the installer from the FuzeVPN for Windows page: it keeps your device and preferences. Choose the one for your processor, x64 or ARM64, shown in Windows Settings → System → About → System type. Once the update is complete, open FuzeVPN if it is not already open. If FuzeVPN shows “Not protected”, click “Quick connect”. Then check that FuzeVPN shows “Protected”.

    For the portable version of FuzeVPN, follow the article on updating on Windows instead.

  3. If the message still comes back, send a report to support.

The update file exceeds the allowed size.

What is happening: the published update file is larger than the size FuzeVPN accepts. The free space on your disk is not the cause.

What to do (in order; stop as soon as it works):

  1. Open “Settings → Updates” in FuzeVPN, then click “Check for updates” and “Download update”. Disconnect the VPN and wait until FuzeVPN shows “Not protected”, then click “Install now” and accept the Windows permission prompt when it appears. Once the update is complete, open FuzeVPN if it is not already open. If FuzeVPN shows “Not protected”, click “Quick connect”. Then check that FuzeVPN shows “Protected”. If the same message comes back, try again later.

  2. If FuzeVPN does not report an incompatible installed version, install the latest version manually, with the installer from the FuzeVPN for Windows page: it keeps your device and preferences. Choose the one for your processor, x64 or ARM64, shown in Windows Settings → System → About → System type. Once the update is complete, open FuzeVPN if it is not already open. If FuzeVPN shows “Not protected”, click “Quick connect”. Then check that FuzeVPN shows “Protected”.

    For the portable version of FuzeVPN, follow the article on updating on Windows instead.

  3. If the message still comes back, send a report to support.

The downloaded file does not match the announced update.

What is happening: the file received does not pass FuzeVPN’s checks: it does not match the announced update, or its content is incomplete or badly formed.

What to do (in order; stop as soon as it works):

  1. Open “Settings → Updates” in FuzeVPN, then click “Check for updates” and “Download update”. Disconnect the VPN and wait until FuzeVPN shows “Not protected”, then click “Install now” and accept the Windows permission prompt when it appears. Once the update is complete, open FuzeVPN if it is not already open. If FuzeVPN shows “Not protected”, click “Quick connect”. Then check that FuzeVPN shows “Protected”. If the same message comes back, try again later.

  2. If FuzeVPN does not report an incompatible installed version, install the latest version manually, with the installer from the FuzeVPN for Windows page: it keeps your device and preferences. Choose the one for your processor, x64 or ARM64, shown in Windows Settings → System → About → System type. Once the update is complete, open FuzeVPN if it is not already open. If FuzeVPN shows “Not protected”, click “Quick connect”. Then check that FuzeVPN shows “Protected”.

    For the portable version of FuzeVPN, follow the article on updating on Windows instead.

  3. If the message still comes back, send a report to support.

The SHA-256 of the received file differs from the announced value.

What is happening: the file received does not exactly match the announced one: its fingerprint, a code calculated from its content, is different. So FuzeVPN refuses to install it.

What to do (in order; stop as soon as it works):

  1. Open “Settings → Updates” in FuzeVPN, then click “Check for updates” and “Download update”. Disconnect the VPN and wait until FuzeVPN shows “Not protected”, then click “Install now” and accept the Windows permission prompt when it appears. Once the update is complete, open FuzeVPN if it is not already open. If FuzeVPN shows “Not protected”, click “Quick connect”. Then check that FuzeVPN shows “Protected”. If the same message comes back, try again later.

  2. If FuzeVPN does not report an incompatible installed version, install the latest version manually, with the installer from the FuzeVPN for Windows page: it keeps your device and preferences. Choose the one for your processor, x64 or ARM64, shown in Windows Settings → System → About → System type. Once the update is complete, open FuzeVPN if it is not already open. If FuzeVPN shows “Not protected”, click “Quick connect”. Then check that FuzeVPN shows “Protected”.

    For the portable version of FuzeVPN, follow the article on updating on Windows instead.

  3. If the message still comes back, send a report to support.

The version of the received file differs from the announced version.

What is happening: the version written in the file received differs from the one announced by the update service. So FuzeVPN refuses to install it.

What to do (in order; stop as soon as it works):

  1. Open “Settings → Updates” in FuzeVPN, then click “Check for updates” and “Download update”. Disconnect the VPN and wait until FuzeVPN shows “Not protected”, then click “Install now” and accept the Windows permission prompt when it appears. Once the update is complete, open FuzeVPN if it is not already open. If FuzeVPN shows “Not protected”, click “Quick connect”. Then check that FuzeVPN shows “Protected”. If the same message comes back, try again later.

  2. If FuzeVPN does not report an incompatible installed version, install the latest version manually, with the installer from the FuzeVPN for Windows page: it keeps your device and preferences. Choose the one for your processor, x64 or ARM64, shown in Windows Settings → System → About → System type. Once the update is complete, open FuzeVPN if it is not already open. If FuzeVPN shows “Not protected”, click “Quick connect”. Then check that FuzeVPN shows “Protected”.

    For the portable version of FuzeVPN, follow the article on updating on Windows instead.

  3. If the message still comes back, send a report to support.

The update signature could not be verified.

What is happening: the signature that proves the update really comes from FuzeVPN could not be confirmed. So FuzeVPN refuses to install it.

What to do (in order; stop as soon as it works):

  1. Check that the Windows date and time are correct. On Windows, open Start → Settings → Time & language → Date & time and turn on “Set time automatically”.

  2. Open “Settings → Updates” in FuzeVPN, then click “Check for updates” and “Download update”. Disconnect the VPN and wait until FuzeVPN shows “Not protected”, then click “Install now” and accept the Windows permission prompt when it appears. Once the update is complete, open FuzeVPN if it is not already open. If FuzeVPN shows “Not protected”, click “Quick connect”. Then check that FuzeVPN shows “Protected”. If the same message comes back, try again later.

  3. If FuzeVPN does not report an incompatible installed version, install the latest version manually, with the installer from the FuzeVPN for Windows page: it keeps your device and preferences. Choose the one for your processor, x64 or ARM64, shown in Windows Settings → System → About → System type. Once the update is complete, open FuzeVPN if it is not already open. If FuzeVPN shows “Not protected”, click “Quick connect”. Then check that FuzeVPN shows “Protected”.

    For the portable version of FuzeVPN, follow the article on updating on Windows instead.

  4. If the message still comes back, send a report to support.

The publisher of the received file does not match FuzeVPN.

What is happening: the update file received has a signature that is not FuzeVPN’s. So FuzeVPN refuses to install it.

What to do (in order; stop as soon as it works):

  1. Open “Settings → Updates” in FuzeVPN, then click “Check for updates” and “Download update”. Disconnect the VPN and wait until FuzeVPN shows “Not protected”, then click “Install now” and accept the Windows permission prompt when it appears. Once the update is complete, open FuzeVPN if it is not already open. If FuzeVPN shows “Not protected”, click “Quick connect”. Then check that FuzeVPN shows “Protected”. If the same message comes back, try again later.

  2. If FuzeVPN does not report an incompatible installed version, install the latest version manually, with the installer from the FuzeVPN for Windows page: it keeps your device and preferences. Choose the one for your processor, x64 or ARM64, shown in Windows Settings → System → About → System type. Once the update is complete, open FuzeVPN if it is not already open. If FuzeVPN shows “Not protected”, click “Quick connect”. Then check that FuzeVPN shows “Protected”.

    For the portable version of FuzeVPN, follow the article on updating on Windows instead.

  3. If the message still comes back, send a report to support.

The received file is not compatible with this computer’s architecture.

What is happening: the update file received does not match your PC’s processor, x64 or ARM64. The cause may be the published file or the version installed on your PC.

What to do (in order; stop as soon as it works):

  1. If FuzeVPN does not report an incompatible installed version, install the latest version manually, with the installer from the FuzeVPN for Windows page: it keeps your device and preferences. Choose the one for your processor, x64 or ARM64, shown in Windows Settings → System → About → System type. Once the update is complete, open FuzeVPN if it is not already open. If FuzeVPN shows “Not protected”, click “Quick connect”. Then check that FuzeVPN shows “Protected”.

    For the portable version of FuzeVPN, follow the article on updating on Windows instead.

  2. If FuzeVPN shows “The installed version of FuzeVPN is not compatible with this computer’s architecture.”, uninstall FuzeVPN: Windows Settings → Apps → Installed apps on Windows 11, or Apps & features on Windows 10. Select FuzeVPN, then “Uninstall”. Then install the right version with the installer from the FuzeVPN for Windows page. Once the update is complete, open FuzeVPN if it is not already open. If FuzeVPN shows “Not protected”, click “Quick connect”. Then check that FuzeVPN shows “Protected”.

  3. Open “Settings → Updates” in FuzeVPN, then click “Check for updates” and “Download update”. Disconnect the VPN and wait until FuzeVPN shows “Not protected”, then click “Install now” and accept the Windows permission prompt when it appears. Once the update is complete, open FuzeVPN if it is not already open. If FuzeVPN shows “Not protected”, click “Quick connect”. Then check that FuzeVPN shows “Protected”. If the same message comes back, try again later.

  4. If the message still comes back, send a report to support.

This update is not compatible with this computer.

What is happening: this update needs a processor or a version of Windows that your PC does not have. So it cannot be installed.

What to do (in order; stop as soon as it works):

  1. Install the Windows updates, then try again.

  2. Check that your PC is supported: Windows 10 or 11, with an x64 or ARM64 processor.

  3. Open “Settings → Updates” in FuzeVPN, then click “Check for updates” and “Download update”. Disconnect the VPN and wait until FuzeVPN shows “Not protected”, then click “Install now” and accept the Windows permission prompt when it appears. Once the update is complete, open FuzeVPN if it is not already open. If FuzeVPN shows “Not protected”, click “Quick connect”. Then check that FuzeVPN shows “Protected”. If the same message comes back, try again later.

  4. If FuzeVPN does not report an incompatible installed version, install the latest version manually, with the installer from the FuzeVPN for Windows page: it keeps your device and preferences. Choose the one for your processor, x64 or ARM64, shown in Windows Settings → System → About → System type. Once the update is complete, open FuzeVPN if it is not already open. If FuzeVPN shows “Not protected”, click “Quick connect”. Then check that FuzeVPN shows “Protected”.

    For the portable version of FuzeVPN, follow the article on updating on Windows instead.

  5. If FuzeVPN shows “The installed version of FuzeVPN is not compatible with this computer’s architecture.”, uninstall FuzeVPN: Windows Settings → Apps → Installed apps on Windows 11, or Apps & features on Windows 10. Select FuzeVPN, then “Uninstall”. Then install the right version with the installer from the FuzeVPN for Windows page. Once the update is complete, open FuzeVPN if it is not already open. If FuzeVPN shows “Not protected”, click “Quick connect”. Then check that FuzeVPN shows “Protected”.

  6. If the message still comes back, send a report to support.

Windows could not open the installed version of FuzeVPN.

What is happening: before installing the update, FuzeVPN must securely open the version already installed on your PC. This did not work.

What to do (in order; stop as soon as it works):

  1. Quit FuzeVPN with “Quit FuzeVPN” in its icon’s menu near the clock, then reopen it. The cross only minimizes FuzeVPN near the clock.

  2. Check that your antivirus is not blocking FuzeVPN. If it is, report this false positive to the antivirus publisher and write to support at contact@fuzevpn.com.

  3. Open “Settings → Updates” in FuzeVPN, then click “Check for updates” and “Download update”. Disconnect the VPN and wait until FuzeVPN shows “Not protected”, then click “Install now” and accept the Windows permission prompt when it appears. Once the update is complete, open FuzeVPN if it is not already open. If FuzeVPN shows “Not protected”, click “Quick connect”. Then check that FuzeVPN shows “Protected”. If the same message comes back, try again later.

  4. If FuzeVPN does not report an incompatible installed version, install the latest version manually, with the installer from the FuzeVPN for Windows page: it keeps your device and preferences. Choose the one for your processor, x64 or ARM64, shown in Windows Settings → System → About → System type. Once the update is complete, open FuzeVPN if it is not already open. If FuzeVPN shows “Not protected”, click “Quick connect”. Then check that FuzeVPN shows “Protected”.

    For the portable version of FuzeVPN, follow the article on updating on Windows instead.

  5. If the message still comes back, send a report to support.

Diagnostics results

The VPN engine is unavailable. Restart the app. Contact support if the problem persists.

What is happening: the check on the part of FuzeVPN that runs the VPN failed.

What to do (in order; stop as soon as it works):

  1. Quit FuzeVPN with “Quit FuzeVPN” in its icon’s menu near the clock, then reopen it. The cross only minimizes FuzeVPN near the clock.

  2. Wait until no VPN connection or disconnection is in progress. Then run diagnostics again: open the “Diagnostics” page in the side menu and click “Diagnostics”.

  3. Restart Windows if the line comes back.

  4. Note the line that still shows a failure or an undetermined result, with its codes: “Error code”, “HTTP”, “TLS” or “Windows code”. Give them to support.

  5. If the message still comes back, send a report to support.

The VPN driver needs to be checked. Contact support before changing it.

What is happening: the check on your computer’s VPN driver failed.

Do not change the driver yourself: after analyzing your report, support may ask you to reinstall FuzeVPN.

What to do (in order; stop as soon as it works):

  1. Wait until no VPN connection or disconnection is in progress. Then run diagnostics again: open the “Diagnostics” page in the side menu and click “Diagnostics”.

  2. Note the line that still shows a failure or an undetermined result, with its codes: “Error code”, “HTTP”, “TLS” or “Windows code”. Give them to support.

  3. If the message still comes back, send a report to support.

The VPN certificate is not confirmed. Retry the VPN connection, then contact support if the problem persists.

What is happening: the check on the VPN certificate failed. This certificate is used to secure the VPN connection.

What to do (in order; stop as soon as it works):

  1. Click “Disconnect” and wait until FuzeVPN shows “Not protected”. Then start the VPN connection again.

  2. If you use OpenVPN, also read the article on revoked or expired OpenVPN profiles.

  3. Wait until no VPN connection or disconnection is in progress. Then run diagnostics again: open the “Diagnostics” page in the side menu and click “Diagnostics”.

  4. Note the line that still shows a failure or an undetermined result, with its codes: “Error code”, “HTTP”, “TLS” or “Windows code”. Give them to support.

  5. If the message still comes back, send a report to support.

Manually disconnect and reconnect the VPN, then run diagnostics again. Contact support if the problem persists.

What is happening: diagnostics found a problem in the VPN connection: its network settings, its status or its exchanges with the server.

What to do (in order; stop as soon as it works):

  1. Click “Disconnect” and wait until FuzeVPN shows “Not protected”. Then start the VPN connection again.

  2. Wait until no VPN connection or disconnection is in progress. Then run diagnostics again: open the “Diagnostics” page in the side menu and click “Diagnostics”.

  3. Note the line that still shows a failure or an undetermined result, with its codes: “Error code”, “HTTP”, “TLS” or “Windows code”. Give them to support.

  4. If the message still comes back, send a report to support.

This protection is not confirmed. Do not assume traffic is blocked. Check the settings and contact support if the problem persists.

What is happening: the check on a protection that is turned on, such as the protection if the connection drops, failed or gave no result.

This message concerns a protection that is turned on: a protection you have turned off shows “Not run”.

What to do (in order; stop as soon as it works):

  1. First click “Disconnect” and wait until FuzeVPN shows “Not protected”. Open “Settings → Privacy → Security” and check that the protection named in the diagnostic result is turned on: “Kill switch”, “DNS protection” or “WebRTC protection”. Then connect again and check that FuzeVPN shows “Protected”.

  2. Wait until no VPN connection or disconnection is in progress. Then run diagnostics again: open the “Diagnostics” page in the side menu and click “Diagnostics”.

  3. Note the line that still shows a failure or an undetermined result, with its codes: “Error code”, “HTTP”, “TLS” or “Windows code”. Give them to support.

  4. If the message still comes back, send a report to support.

Check your Internet connection, then run diagnostics again. The tunnel may work even if the API does not respond.

What is happening: diagnostics could not reach the FuzeVPN service. The VPN connection may still work.

In this message, “the API” means the FuzeVPN service, and “the tunnel” means the VPN connection.

What to do (in order; stop as soon as it works):

  1. Open a website to check that your internet connection works. If no website opens, disconnect the VPN, then try opening a website again.

  2. Wait until no VPN connection or disconnection is in progress. Then run diagnostics again: open the “Diagnostics” page in the side menu and click “Diagnostics”.

  3. Note the line that still shows a failure or an undetermined result, with its codes: “Error code”, “HTTP”, “TLS” or “Windows code”. Give them to support.

  4. If the message still comes back, send a report to support.

The service returned an HTTP error response. Check the error code.

What is happening: diagnostics reached the FuzeVPN service, but it replied with an error.

What to do (in order; stop as soon as it works):

  1. Wait a moment, then run diagnostics again.

  2. Sign in to your FuzeVPN account again if the line still shows an error.

  3. Also check that your subscription is active.

  4. Note the line that still shows a failure or an undetermined result, with its codes: “Error code”, “HTTP”, “TLS” or “Windows code”. Give them to support.

  5. If the message still comes back, send a report to support.

The received response could not be interpreted. Check the error code.

What is happening: a response received during diagnostics, from your computer or from the FuzeVPN service, is not in the expected format.

What to do (in order; stop as soon as it works):

  1. Wait until no VPN connection or disconnection is in progress. Then run diagnostics again: open the “Diagnostics” page in the side menu and click “Diagnostics”.

  2. Note the line that still shows a failure or an undetermined result, with its codes: “Error code”, “HTTP”, “TLS” or “Windows code”. Give them to support.

  3. If the message still comes back, send a report to support.

This check failed. Run diagnostics again. Contact support if the problem persists.

What is happening: the check shown on this diagnostics line failed.

What to do (in order; stop as soon as it works):

  1. Wait until no VPN connection or disconnection is in progress. Then run diagnostics again: open the “Diagnostics” page in the side menu and click “Diagnostics”.

  2. Note the line that still shows a failure or an undetermined result, with its codes: “Error code”, “HTTP”, “TLS” or “Windows code”. Give them to support.

  3. If the message still comes back, send a report to support.

This measurement is unavailable. Run diagnostics again. If it remains unknown, contact support.

What is happening: diagnostics could not measure the item shown on this line. This does not prove that the item checked is broken.

What to do (in order; stop as soon as it works):

  1. Wait until no VPN connection or disconnection is in progress. Then run diagnostics again: open the “Diagnostics” page in the side menu and click “Diagnostics”.

  2. Note the line that still shows a failure or an undetermined result, with its codes: “Error code”, “HTTP”, “TLS” or “Windows code”. Give them to support.

  3. If the message still comes back, send a report to support.

Send a report to support

  1. Open the “Diagnostics” page in the side menu and click “Diagnostics”. If “Send” appears, click it to send the report. With automatic reporting turned on, the report is sent automatically. If an account is signed in, the report ID appears after sending. For a report still waiting to be sent, FuzeVPN makes up to 5 automatic attempts within 24 hours. “Try again” sends it again. If the service refuses the report, use email instead. Open “Complete diagnostic”, select its text, copy it and paste it into an email.

  2. Then write to support at contact@fuzevpn.com, with the exact message and the report ID if shown. Copy the codes from the Diagnostics page: “Error code”, “HTTP”, “TLS” or “Windows code”. Also include the time, the FuzeVPN version if visible, and the location, protocol and network used. If you are not signed in, open “Complete diagnostic” and copy its text into your email to support. We reply within 72 hours, in your language.