Find your message below: its solution is right underneath.
Other pages:Windows: the VPN connectionWindows: server, secure connection and deviceWindows: updates and diagnostics
Setting or favorite not saved
The language could not be saved on this computer.
What is happening: FuzeVPN could not save your language choice on this computer.
What to do (in order; stop as soon as it works):
Try again: make the same choice again, under “Settings → General → Language”.
Quit FuzeVPN with “Quit FuzeVPN” in its icon’s menu near the clock, then reopen it. The cross only minimizes FuzeVPN near the clock. Then check that your choice has been kept.
If the message still comes back, send a report to support.
The theme could not be saved on this computer.
What is happening: FuzeVPN could not save your theme choice on this computer.
What to do (in order; stop as soon as it works):
Try again: make the same choice again, under “Settings → General → Appearance”.
Quit FuzeVPN with “Quit FuzeVPN” in its icon’s menu near the clock, then reopen it. The cross only minimizes FuzeVPN near the clock. Then check that your choice has been kept.
If the message still comes back, send a report to support.
The notification preference could not be saved.
What is happening: FuzeVPN could not save your notification choice on this computer. Your previous choice is restored.
What to do (in order; stop as soon as it works):
Try again: make the same choice again.
If the message still comes back, send a report to support.
Automatic connection could not be saved.
What is happening: FuzeVPN could not save your “Connect on startup” choice (“Settings → Connection → Connection”) on this computer. Your previous choice is restored.
What to do (in order; stop as soon as it works):
Try again: make the same choice again.
Quit FuzeVPN with “Quit FuzeVPN” in its icon’s menu near the clock, then reopen it. The cross only minimizes FuzeVPN near the clock. Then check that your choice has been kept.
If the message still comes back, send a report to support.
Launch with Windows could not be changed.
What is happening: the setting that starts FuzeVPN when you sign in to Windows could not be changed.
What to do (in order; stop as soon as it works):
Set “Launch with Windows” again, in “Settings → General → Windows”. Do this from your usual Windows session.
If the message still comes back, send a report to support.
The selected server could not be saved on this computer.
What is happening: FuzeVPN could not save the chosen location on this computer. So your new choice is not applied.
What to do (in order; stop as soon as it works):
Try again: make the same choice again.
Quit FuzeVPN with “Quit FuzeVPN” in its icon’s menu near the clock, then reopen it. The cross only minimizes FuzeVPN near the clock. Then check that your choice has been kept.
If the message still comes back, send a report to support.
This favorite could not be saved on this computer.
What is happening: FuzeVPN could not save this favorite on this computer. Your list returns to its last saved state.
What to do (in order; stop as soon as it works):
Add or remove this favorite again.
Quit FuzeVPN with “Quit FuzeVPN” in its icon’s menu near the clock, then reopen it. The cross only minimizes FuzeVPN near the clock. Then check that your choice has been kept.
If the message still comes back, send a report to support.
The VPN protocol could not be saved on this computer.
What is happening: FuzeVPN could not save the chosen protocol on this computer.
What to do (in order; stop as soon as it works):
If FuzeVPN shows “Disconnect”, click it and wait until FuzeVPN shows “Not protected”.
Then choose your protocol again in “Settings → Connection → VPN protocol”. Then connect again and check that FuzeVPN shows “Protected”.
If the message still comes back, send a report to support.
The saved security settings cannot be read. Default protections remain enabled.
What is happening: at startup, FuzeVPN could not read your saved security settings. So the default protections are all turned on.
What to do (in order; stop as soon as it works):
If FuzeVPN shows “Disconnect”, click it and wait until FuzeVPN shows “Not protected”.
Check your protection choices in “Settings → Privacy → Security”, then make them again: “Kill switch” (protection if the connection drops), “DNS protection” and “WebRTC protection”. Then connect again and check that FuzeVPN shows “Protected”.
Check your “Automatic reconnection” choice in “Settings → Connection → Connection”, then make it again. Then connect again and check that FuzeVPN shows “Protected”.
Quit FuzeVPN with “Quit FuzeVPN” in its icon’s menu near the clock, then reopen it. The cross only minimizes FuzeVPN near the clock. Then check that your choice has been kept. Then connect again and check that FuzeVPN shows “Protected”.
If the message still comes back, send a report to support.
The security settings could not be saved.
What is happening: an error prevented your security settings from being saved or applied.
What to do (in order; stop as soon as it works):
If FuzeVPN shows “Disconnect”, click it and wait until FuzeVPN shows “Not protected”.
Check your protection choices in “Settings → Privacy → Security”, then make them again: “Kill switch” (protection if the connection drops), “DNS protection” and “WebRTC protection”. Then connect again and check that FuzeVPN shows “Protected”.
Quit FuzeVPN with “Quit FuzeVPN” in its icon’s menu near the clock, then reopen it. The cross only minimizes FuzeVPN near the clock. Then check that your choice has been kept. Then connect again and check that FuzeVPN shows “Protected”.
If the message still comes back, send a report to support.
This choice could not be saved. It may be lost when the app restarts. Try again.
What is happening: your choice for the automatic reporting of important errors could not be saved. This happens in particular when you are no longer signed in to your account.
What to do (in order; stop as soon as it works):
Check that you are still signed in to your FuzeVPN account. Then open the “Diagnostics” page in the side menu and set “Automatically send significant error reports” again.
If the message still comes back, send a report to support.
Saved session or protected storage cannot be used
The saved session could not be cleared. Try signing out of your account again.
What is happening: FuzeVPN could not clear your saved session from this computer, while signing out of the account or when the session expired.
What to do (in order; stop as soon as it works):
Try signing out of your account again: open “My account”, then click “Sign out of account”. Wait until it succeeds before signing in with another account.
Quit FuzeVPN with “Quit FuzeVPN” in its icon’s menu near the clock. The cross only minimizes FuzeVPN near the clock. Reopen it with the same Windows account as usual, accept the Windows prompt if it appears, then try again.
If the message still comes back, send a report to support.
Your saved session could not be read. Try verifying it again.
What is happening: FuzeVPN could not read your saved session on this computer. It is not cleared: it stays saved, waiting to be verified.
What to do (in order; stop as soon as it works):
Click “Try again” in the “Account verification” notice.
Quit FuzeVPN with “Quit FuzeVPN” in its icon’s menu near the clock. The cross only minimizes FuzeVPN near the clock. Reopen it with the same Windows account as usual, accept the Windows prompt if it appears, then try again.
If the message still comes back, send a report to support.
Windows could not open WireGuard’s protected storage.
What is happening: FuzeVPN could not prepare or save the WireGuard settings in its protected storage, on this computer.
What to do (in order; stop as soon as it works):
Try the action that failed again.
Quit FuzeVPN with “Quit FuzeVPN” in its icon’s menu near the clock. The cross only minimizes FuzeVPN near the clock. Reopen it with the same Windows account as usual, accept the Windows prompt if it appears, then try again.
Reinstall FuzeVPN with the installer from the FuzeVPN for Windows page, including if you installed it from the Microsoft Store. If “Repair” is offered, choose it. Your device and preferences are kept. Choose the installer for your processor, x64 or ARM64, shown in Windows Settings → System → About → System type.
Manual updates also keep your device and preferences.
If the message still comes back, send a report to support.
Access to protected storage failed. Restart the app, then contact support if the problem persists.
What is happening: FuzeVPN could not read, save or decrypt data in its protected storage, on this computer.
What to do (in order; stop as soon as it works):
Quit FuzeVPN with “Quit FuzeVPN” in its icon’s menu near the clock. The cross only minimizes FuzeVPN near the clock. Reopen it with the same Windows account as usual, accept the Windows prompt if it appears, then try again.
Reinstall FuzeVPN with the installer from the FuzeVPN for Windows page, including if you installed it from the Microsoft Store. If “Repair” is offered, choose it. Your device and preferences are kept. Choose the installer for your processor, x64 or ARM64, shown in Windows Settings → System → About → System type.
Manual updates also keep your device and preferences.
If the message still comes back, send a report to support.
FuzeVPN protected storage cannot be used. Try again.
What is happening: FuzeVPN could not read or save data in its protected storage, on this computer, for example the link between this device and your account.
What to do (in order; stop as soon as it works):
Try the action that failed again.
Quit FuzeVPN with “Quit FuzeVPN” in its icon’s menu near the clock. The cross only minimizes FuzeVPN near the clock. Reopen it with the same Windows account as usual, accept the Windows prompt if it appears, then try again.
Reinstall FuzeVPN with the installer from the FuzeVPN for Windows page, including if you installed it from the Microsoft Store. If “Repair” is offered, choose it. Your device and preferences are kept. Choose the installer for your processor, x64 or ARM64, shown in Windows Settings → System → About → System type.
Manual updates also keep your device and preferences.
If the message still comes back, send a report to support.
FuzeVPN service unreachable or unexpected error
The check did not complete. The cause has not yet been identified.
What is happening: the check on access to the FuzeVPN service did not complete, because of an error the app does not recognize.
What to do (in order; stop as soon as it works):
Check that the internet works without the VPN: disconnect the VPN, then open a website.
Quit FuzeVPN with “Quit FuzeVPN” in its icon’s menu near the clock. The cross only minimizes FuzeVPN near the clock. Then reopen it and try again.
Wait a moment, then try the action again. If you were trying to connect to the VPN, choose another location from the list, then try again.
If the message still comes back, send a report to support.
The network connection attempt failed. This does not establish whether the service is unavailable.
What is happening: the app could not reach the FuzeVPN service over the network, or received no reply in time.
What to do (in order; stop as soon as it works):
Check that the internet works without the VPN: disconnect the VPN, then open a website.
Then try again. You can also try again from another network.
If the message comes back, remove this device from your account: open “Devices” in the side menu, find “This device”, click “Remove device”, then confirm with “Remove”. You can also remove it from another FuzeVPN app or extension, or from the Devices section of your customer area. If the connection card shows “Create a new identity”, use that button, then confirm “Continue”. Then connect to the VPN again: a new device is created.
Reinstall FuzeVPN with the installer from the FuzeVPN for Windows page, including if you installed it from the Microsoft Store. If “Repair” is offered, choose it. Your device and preferences are kept. Choose the installer for your processor, x64 or ARM64, shown in Windows Settings → System → About → System type.
Manual updates also keep your device and preferences.
If the message still comes back, send a report to support.
FuzeVPN cannot use this computer’s network configuration to reach the service.
What is happening: this computer’s network settings do not let FuzeVPN find or reach the FuzeVPN service.
What to do (in order; stop as soon as it works):
Check that the internet works without the VPN: disconnect the VPN, then open a website.
Quit FuzeVPN with “Quit FuzeVPN” in its icon’s menu near the clock. The cross only minimizes FuzeVPN near the clock. Then reopen it and try again.
If the message comes back, remove this device from your account: open “Devices” in the side menu, find “This device”, click “Remove device”, then confirm with “Remove”. You can also remove it from another FuzeVPN app or extension, or from the Devices section of your customer area. If the connection card shows “Create a new identity”, use that button, then confirm “Continue”. Then connect to the VPN again: a new device is created.
Reinstall FuzeVPN with the installer from the FuzeVPN for Windows page, including if you installed it from the Microsoft Store. If “Repair” is offered, choose it. Your device and preferences are kept. Choose the installer for your processor, x64 or ARM64, shown in Windows Settings → System → About → System type.
Manual updates also keep your device and preferences.
If the message still comes back, send a report to support.
Send a report to support
Open the “Diagnostics” page in the side menu and click “Diagnostics”. If “Send” appears, click it to send the report. With automatic reporting turned on, the report is sent automatically. If an account is signed in, the report ID appears after sending. For a report still waiting to be sent, FuzeVPN makes up to 5 automatic attempts within 24 hours. “Try again” sends it again. If the service refuses the report, use email instead. Open “Complete diagnostic”, select its text, copy it and paste it into an email.
Then write to support at contact@fuzevpn.com, with the exact message and the report ID if shown. Copy the codes from the Diagnostics page: “Error code”, “HTTP”, “TLS” or “Windows code”. Also include the time, the FuzeVPN version if visible, and the location, protocol and network used. If you are not signed in, open “Complete diagnostic” and copy its text into your email to support. We reply within 72 hours, in your language.